How to Repair a Door Frame？ Please see below：
Fixing a Warped Door Frame
Remove the door stop and molding. Use a chisel and hammer or putty knife to pry the door stop and molding away from the frame. Start at the bottom of the frame and work your way up.
Take care not to damage the stop as you remove it from the frame. Place the claw end of the hammer on the side of each nail to support even removal.
Remove any remaining finishing nails left in the molding.
Remove any shims from in between the door frame and the wall. Door shims are used to correct and level doors with the frame so that the door is squared, or even, between both sides of the frame. These must be removed in order to adjust the warped door frame.
| Material | MDF/HDF |
| Door Type | Venner Door |
| Size | Length: 1900mm-2150mm |
| Width: 600mm-1050mm | |
| Thickness: 3mm-6mm | |
| Depth: 8mm-12mm | |
| Embossed: 16.8mm | |
| Density | >850g/cm3 |
| Moisture | 6%~10% |
| Finish Type | Unfinished |
| MOQ | 500 PCS |
| Payment | By T/T or L/c at sight, 30% deposit and balance before loading |
| Shipment | Within 30 days after receive the deposit |
| Packing Detail | 30-35 PCS/Pallet, Extra Bundles are available |
| Term of Shipment | FOB, CIF,CNF，FCA |