Commercial Shop Polycarbonate Folding Door Plastic Accordion Sliding Doors Shopfront PC Shutter Door
Home » Products » Showroom » Commercial Shop Polycarbonate Folding Door Plastic Accordion Sliding Doors Shopfront PC Shutter Door

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Commercial Shop Polycarbonate Folding Door Plastic Accordion Sliding Doors Shopfront PC Shutter Door

Wood Plastic Composite (WPC) is a composite material made from sawdust and plastic as polymer bonding, that used in a variety of structural and non-structural applications.
Quantity:
We integrate technological innovation into our development bloodline and hope to create 12mm Depth Design Veneer Door, Bathroom Louver Solid Wood Bi-floding Door, Fashionable Solid Pine Wood Door that represent the advanced level of China and the world. Please get hold of us freely. The mutual trust and mutual respect between the company and employees can greatly improve efficiency and save management costs.

JHK-W009 Flush Wood Door Profile Bathroom Door

Wood Plastic Composite (WPC) is a composite material made from sawdust and plastic as polymer bonding, that used in a variety of structural and non-structural applications. Nowadays, In Indonesia WPC is made from Sengon sawdust and recycled HDPE plastic. This research was conducted in order to investigate the physical and mechanical properties of WPC from Sengon sawdust in accordance with ASTM D7031. From the physical test, due to its water restrains, WPC has low moisture content, water absorption and swelling. For the mechanical properties, the bending strength and shear strength are around 40.49 MPa and 27.35 MPa, respectively. However, the WPC tensile strength is lower than common tropical wood, which is only 5.54 to 12.75 MPa, due to the absence of grain in WPC. Furthermore, the modulus of elasticity is only 2113 to 3398 MPa or around one tenth of that wood or concrete modulus of elasticity. From the withdrawal test shows that sheet metal screw type has the highest withdrawal strength compared to cut thread wood, and fine thread drywall screw. Hence, for structural application it is suggested that the WPC board is used for structural element with high moment inertia such as shear wall as its lower modulus of elasticity but has high shear strength.

wpc_01

wpc_02

wpc_03

wpc_04

wpc_05

wpc_06

wpc_07

wpc_08

wpc_09

wpc_10

wpc_11

wpc_12

wpc_13

wpc_14

wpc_15

With the continuous improvement of Commercial Shop Polycarbonate Folding Door Plastic Accordion Sliding Doors Shopfront PC Shutter Door quality, considerate pre-sale, in-sales and after-sales services, our company fully demonstrates the business integrity and social responsibility of the enterprise. We sincerely hope we can establish win-win business cooperation with you in the future! Brand can create invisible competitive advantage, good brand can create good market effect and provide huge economic benefits.
Previous: 
Next: 
Follow Us
Copyrights © 2021 Zhejiang JiHengKang Door Industry Co., Ltd.

CONTACT US

Mob: +86-15605898555
Mob: +86-15669548888
Email: zjhk@zjjhk.com

QUICK LINK