English 
 |
JHK-M11 HDF Interior Shutter Design White Primer Door
HDF doors interior | Door shutter designs | Doors for hotels |
Product Description
Before you prime, give the doors a good sand using a flat sander or a cork sanding block on any flat areas, as this will knock any high points off. 150 grit paper is good for this.
When you prime the MDF doors, make sure you paint the front and back in one session. If you paint one side and leave the other too long the door may bow due to uneven moisture content. Prime with a water based quick dry acrylic primer, then you can use any Farrow and Ball or Dulux color.
After your first coat of primer a lot of fiber will expand. This is natural due to the wood fiber expanding when wet.
More sanding I'm afraid! This is the key stage - a good sanding will give you a better final finish.
You will need a second coat of primer and sometimes a third coat, sanded in between.
You are now ready for your top coat. You may get away with one but could need two coats.
You should now have a fantastic looking MDF kitchen door!
FAQ:
1. When did your company establish?
JHK: Since 2000, we are a manufacturer with 15 years’ experience.
2. How many people work in your company?
JHK: About 500 People.
3. What is the capacity of production per year?
JHK: More than 500,000 PCS.
4. What raw materials of wood do you have?
JHK: Natural wood and EV wood are both available. Red oak, ash, teak and mahogany are our recommended materials.
5. What is the MOQ?
JHK: One 20’ container, which can hold 2500-3000 PCS door skins. Sample order is also available.
6. What is the delivery time?
JHK: It will be around 40 days after receiving the payment.
7. Can I visit your factory?
Yes, of course! We are very welcome for your visiting, and we will pick you up at the YIWU airport or the Jinhua railway station.
8. How about your after-sale service?
JHK: We guarantee our customers one-year warranty, and will deliver forever service no matter before or after the sale.
JHK-M11 HDF Interior Shutter Design White Primer Door
HDF doors interior | Door shutter designs | Doors for hotels |
Product Description
Before you prime, give the doors a good sand using a flat sander or a cork sanding block on any flat areas, as this will knock any high points off. 150 grit paper is good for this.
When you prime the MDF doors, make sure you paint the front and back in one session. If you paint one side and leave the other too long the door may bow due to uneven moisture content. Prime with a water based quick dry acrylic primer, then you can use any Farrow and Ball or Dulux color.
After your first coat of primer a lot of fiber will expand. This is natural due to the wood fiber expanding when wet.
More sanding I'm afraid! This is the key stage - a good sanding will give you a better final finish.
You will need a second coat of primer and sometimes a third coat, sanded in between.
You are now ready for your top coat. You may get away with one but could need two coats.
You should now have a fantastic looking MDF kitchen door!
FAQ:
1. When did your company establish?
JHK: Since 2000, we are a manufacturer with 15 years’ experience.
2. How many people work in your company?
JHK: About 500 People.
3. What is the capacity of production per year?
JHK: More than 500,000 PCS.
4. What raw materials of wood do you have?
JHK: Natural wood and EV wood are both available. Red oak, ash, teak and mahogany are our recommended materials.
5. What is the MOQ?
JHK: One 20’ container, which can hold 2500-3000 PCS door skins. Sample order is also available.
6. What is the delivery time?
JHK: It will be around 40 days after receiving the payment.
7. Can I visit your factory?
Yes, of course! We are very welcome for your visiting, and we will pick you up at the YIWU airport or the Jinhua railway station.
8. How about your after-sale service?
JHK: We guarantee our customers one-year warranty, and will deliver forever service no matter before or after the sale.
